7
Getting Started:
POWER
UP & TUNING
1)
Switch on your TV and satellite receiver
2)
Using your TV remote control select the relevant
HDMI, SCART or AV
input
(depending on the connection used) to view the receiver menu or select the
satellite input if using a TV with integrated receiver
3) You should now see a 'no signal' or
-
'bad signal' message
4) Using the receivers remote (or TV remote if using a TV
with integrated receiver
) select BBC 1
(just press the 1 button if using the optional mini receiver, for other receivers/TVs refer to
its own user manual for instructions). The screen will return to the 'No signal' message after a
few seconds. You are now ready for the next part of
the tuning process.
Note:
The optional mini receiver has been pre-tuned to Astra 28 for UK TV,
for other satellites and channels please use the supplied mini receiver user guide
Note:
If you are using your own receiver or a TV with integrated receiver you should
make sure that it has a channel list before use, if it does not then you should follow
the procedure to update the channels while it is connected to a pre-aligned dish.
5) If using the optional mini receiver use the remote (Item I) to increase the volume to full
6) Using the TV
remote increase the volume to full
You are now ready to
start the alignment of
your dish
7) With the dish face starting at vertical slowly tilt the top of dish
back until the correct Elevation for your camping location reads
on the Elevation meter as demonstrated (Fig 1 )
You can get the correct elevation for you location from the
QuickSAT elevation chart or by using www.dishpointer.com or
an app on your smartphone such as Sat Finder.
Fig 1
Summary of Contents for QS65
Page 1: ...QS65 USER MANUAL...
