6
Getting Started:
C ONNEC TING REC EIVER
NOTE: These instructions show the optional QuickSAT mini receiver (Item F) but the procedure will be very
similar
for other FREESAT and SKY set top receivers.
This section takes you through connecting the mini receiver.
Connect the receiver to the TV, images 1 & 2 below show the optional mini
receiver connected using the RCA lead and SCART adapter
Image 1
Image 2
Connect the F-type connector on the dual cable (Item C) from the satellite
dish to the threaded
LNB Input
socket on the receiver (or LNB input on a
TV with integrated receiver)
Locate the headphone socket on your TV and plug in the 3.5mm jack plug
from the dual cable (Item C) into it
Connect the receiver to the power supply and position close to the TV.
Please ensure all equipment is switched off before
connecting/disconnecting any cables
If using the optional mini receiver plug the remote eye (Item H) into the
mini receiver (Item F) and position the eye on the front of the TV using the
supplied adhesive pad
Summary of Contents for QS65
Page 1: ...QS65 USER MANUAL...
