STEP C: ATTACH THE BACKBOARD
11
G
12
11
LONG
SPACER
E
G
11
12
10
3. Carefully lift the Backboard into position
and attach the x2 Upper Backboard
Support Poles (11) to the Upper Post
using Hardware Set (E).
IMPORTANT:
Ensure that the Nylon
Washers (plastic) are positioned between
the Upper Post and Upper Backboard
Support Poles on both sides.
NYLON WASHERS
4. Next attach the x2 Lower Backboard
Support Poles (10) to the lower bracket of
the Backboard (12) using Hardware Set
(G). Place the Long Spacer between the
two poles as shown in 2. above.
1. Lay the Backboard (12) face down on a
flat and even surface.
2. Attach the x2 Upper Backboard Support
Poles (11) to the upper bracket of the
Backboard (12) using Hardware Set (G).
Place the Long Spacer between the two
poles as shown below:
6
