When using the T12 iron tip please tighten the nut for soldering
head to avoid falling and damaging the iron tip.
The temperature will be reached above 350
℃
of soldering
station is used for 40 minutes, and the temperature of the front
end of the handle will be reached 50
℃
-60
℃
.
When the new T12 soldering iron tip is used for the first
time,Host will appear temperature jump and display ERROR,it
will become a normal phenomenon due to the heating of the
inner galvanic couple part of the iron tip. After repeated use
several times, the temperature will be stabled.
Matters needing attention
Conventional safety
Please use only the power adapter that is dedicated to the
product and is certified by the country / area.
Do not operate in a wet environment.
Do not operate in a flammable and explosive environment.
Please keep the surface of the product clean and dry.
To protect your family and friends for the safety, please power
off after use or leave, beware of fire.
When the host is starting up, the temperature of iron tip will
be reached 100
℃
to 480
℃
, beware of scalds.
Do not be soaked in water or with wet hands to use the
soldering station, prevent leakage.
Operating environment
Operating environment
Requirements
temperature
humidness
Working con0
to +50
℃
℃
Off working state:-20
to +60
℃
℃
Working condition:high temperature 40
-60
, 0%-60%RH
℃
℃
Working condition:low temperature 0
-40
, 10%-90%RH
℃
℃
Off working state:high temperature 40
-60
, 5%-60%RH
℃
℃
Off working state:low temperature 0
-40
, 5%-90%RH
℃
℃
