Battery guard
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
MENU
7.BUZZERSWITCH
8.BATTERYGUARD
9.FIRMWARE
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
BATTERYPROTECT
AT[12.0V]
According to the voltage environment of the host, built-in battery guard function of this
soldering station, and the default voltage is 12V. When the voltage is not stable, the power
supply will be supercharged according to the setting. Usually don't need to set it. The
setting range is 12V-24V.
Version information
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
MENU
7.BUZZERSWITCH
8.BATTERYGUARD
9.FIRMWARE
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
FIRMWARE
[V1.4@20170618]
It shows the information of this version controller.
Restore default
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
MENU
8.BATTERYGUARD
9.FIRMWARE
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
RESTORESETTING
[NO]
A.FACTORYRESET
Restore the parameters of the soldering station to the factory default. Note: please back-up
your usual important parameters before you restore factory Settings to prevent data loss.
For example: temperature calibration value, strengthening time and temperature, etc.
