20
2. Pay careful attention to overhead clearances - stand
clear at all times.
3. Operate the
UP
control until each jack platform makes
contact with vehicle undercarriage. Check contact points.
If required, slightly position Rubber Lift Blocks as needed.
4. When ready, raise vehicle keeping the UP button
continuously depressed until tires clear the floor and the
jack frames are at least 12” off the ground or the first
safety lock position has been reached.
5. Continue to raise to desired height only if vehicle is
secure on lift. Keep hair, loose clothing, fingers, and all
parts of body away from moving parts. Keep feet clear of
jack when lowering. Avoid pinch points.
6. Operate the UP control until each jack platform
reaches either the low locking position or high locking
position.
7. Raise vehicle to desired locking position, then ensure
both safety lock bars (#1) are fully engaged in their
respective receiver (#2) before nearing elevated vehicle.
STAY ALERT
. Use common sense and watch what you
are doing. Remember,
SAFETY FIRST
.
TO LOWER JACK FRAMES
1. Ensure that load is firmly positioned and secured on
jack frames.
2. Operate the
UP
control until safety lock bars are clear.
3. Raise and stow the safety lock bars.
4. Stand clear of vehicle and jack frames.
5. Operate the
DOWN
control until both the jack frames
are lowered completely to the floor.
6. Using the utility handles, remove the jack frames from
underneath the vehicle.
7.
DO NOT
drive or ride vehicles over jack frames at any
time.
IMPORTANT NOTE:
Before removing vehicle, both jack frames must be fully
lowered and working area cleared of any obstruction
before vehicle is brought into position.
DO NOT
drive on
or ride vehicles over jack frames at any time.
1
2
ALWAYS MAKE SURE THE SAFETIES ARE
ENGAGED BEFORE ATTEMPTING TO WORK ON
OR NEAR A VEHICLE.
DO NOT GO NEAR OR UNDER A RAISED VEHICLE
IF ALL FOUR RUBBER LIFTING BLOCKS ARE NOT
IN SECURE CONTACT WITH VEHICLE.
IMMEDIATELY CLEAR AREA IF VEHICLE IS IN
DANGER OF FALLING.
Summary of Contents for BL-3500
Page 4: ...4...
