24
Quickie Tango
6.9 powered height-adjustable legrests:
The legrests can be adjusted via the joystick.
Press the actuator mode button to select Actuator Mode.
Moving the joystick forwards brings the legrests up,
moving the joystick backwards brings them down.
A left or right joystick movement will select other seat
actuator functions.
Press the actuator mode button again to return to drive
mode.
6.10 manual height-adjustable footrests:
to operate:
Loosen the actuator wheel to free the leg rest.
•
Grip the leg rest & move it to the required position.
•
Tighten the actuator wheel .
•
The leg rest will now be locked in the chosen
•
position.
warnIng!
Keep hands clear of the adjustment mechanism
•
between the frame and moving parts of the footrest
during adjustment.
Leg rests must not be used for lifting or carrying the
•
wheelchair under any circumstances.
6.11 slopes (fig.6.8):
The following instructions explain how to manoeuvre
correctly on steep ramps and slopes, especially in the
course of descent.
warnIng!
If your chair has a powered seat tilt, powered recline
•
or manual recline back, we strongly recommend that
you bring the backrest into an upright position and set
the seat tilt to the level position.
If you stop on an incline, start off slowly and, if
•
necessary, lean forward to counteract the tendency of
the front wheels to rise.
On descents it is important not to allow the wheelchair
•
to exceed normal speed. Indeed, the safest course is
to go down steep hills slowly and to stop immediately
if you have any doubts about the steering.
If the chair gathers speed, move the joystick to its
•
central position to slow down, or stop completely.
Start off again slowly and do not allow speed to
•
increase. Make sure the automatic brakes are
engaged.
Climbing or descending a slope with the automatic
•
brakes disengaged can be dangerous.
6.12 transfers (fig.6.9):
Always position the wheelchair close to the place where
the transfer will be carried out. It is important
that the controller is turned OFF, so that the wheelchair
will not move throughout the procedure.
The wheelchair is highly stable owing to its weight. Do not
stand up on the footrests at any time during the transfer.
fig.6.8
fig.6.9
fig. 6.6
fig. 6.7
