48
Puma 40 Sedeo Ergo
Rev.1.0
ENGLISH
14.3 Removing the castor wheel.
Note the position of the castor & which hole is used to mount it.
Ensure that
both castors use the same mount position.
•
Use a 5.0mm hex key remove the 2 axle studs, (Fig.14.11).
•
Remove the centre spacers and spindle, (Fig.14.12).
For pneumatic tyres
,
•
let the air out of the tyre.
•
Undo the 3 hub studs, (Fig.14.13).
•
Lift the hubs out, (Fig.14.14).
•
Gently feed the tube out of the tyre, (Fig.14.15)
•
When refitting the hub studs, tighten to a torque of 15-20Nm.
WARNING!
Always use a new nyloc nut when refitting.
Fig. 14.11
Fig. 14.12
Fig. 14.14
Fig. 14.15
Fig. 14.13
Fig. 14.16
Summary of Contents for Puma 40
Page 155: ......
