5
Door Hinges
- Doors hinges come in 2 parts, an eye and a peg fitting. The peg fitting is slotted
over the upright pole from which the door is hung. A door can be placed anywhere on the
structure where there is an upright. The fittings need not be secured at this stage, you only need
to ensure that the peg fitting is facing upwards when you slide them over the pole.
Mowing Strip
- The mowing strip is an optional timber strip that runs around the base of the
cage and enables grass to be strimmed without fouling the netting. There are two fittings used,
a single and double lug. The single lug is used at the corners and beside the door, the double
lug is used on all other poles.
2 x single lug brackets are placed at the corners with the lugs opposite each other and facing
outwards. Only one double lug fitting is required for all other poles. To fit the timber boards align
the fittings so the brackets face outwards. Offer the boards up against the brackets and mark
the fixing hole. Drill the boards using the bit provided and fix to the brackets using the included
fixings; the washer is placed against the timber on the outside. Adjust and tighten the fittings
until the boards are level.
