Quick QUICK7610, Operation Manual

Page: 6 / 19

QUICK7610 Operation Manual
4
5.3 Connect the Unit

Please check whether the power voltage accords with the rated voltage on the equipment
nameplate.

Please check whether switches are turned off before connection.

Connect Power cord to the power socket behind equipment.

If use IR Soft, please connect RS232 to behind RS232.

COOLFAN: connect cooling fan power line.

USB: output 5V DC, connect floodlight.
After finishing above steps, insert power plug into power socket, and switch on power.
5.4 PCB Fixture
1. Movable PCB fixture is able to fix PCB with different size. The Lock Knobs lock PCB Fixed Bar
to fix PCB.
2. The movable distance from forward to back is 125mm, and the maximal movable distance from
left to right is 280mm.
3.
The usable height is 125mm, the outer dimensions of fixture is:
690
（
L
）
* 480(W) * 135(H)mm.
4. Unscrew PCB Lock Knobs and push Sliding Blocks by hand to open PCB Fixed Bars, make the
distance between PCB Fixed Bars accord with PCB size. Fix PCB between them and screw
down PCB Lock Knobs after adjusting position.
Bottom avoid collapse
holder
Power
RS232
Outer cooling fan
PCB Lock Knob
PCB Fixed Bar Sliding Block
Special PCB holder