Quick QUICK7610, Operation Manual

Page: 10 / 19

QUICK7610 Operation Manual
8
C. Modify working mode
For instance: Modify the working mode and make it in “desolder” mode.
Press “-” Press “SET”
Press “-” or “+” Press “OK”
After finishing modifying working mode, if you want to modify laser alignment mode, operate as D
item shows; if no need to modify it, please press “DOWN” key to browse the next parameter
settings.
C-1. Modify Parameter of working flow
1. If it is necessary to modify parameter of a working flow, first you must select the working flow
and then modify its parameter.
2. The modification of parameter must accord with the following technics graph.
TB
表示
TC
表示
Tb
T3
TL
S1
T2
T1
℃
Tb=T0
S2 S3
Tb
TC
The soldering technics is decided by T0, TB, T1, T2, T3, S1, S2 and S3. It describes the
temperature graph during the system working. TL denotes Melting temperature of solder and the
password: ***
select: 1
select: 1
type: solder
select: 1
type: solder
select: 1
type: desolder
select: 1
type: desolder