SECTION 7 Replaceable parts
1. Replacing the fuse.
1) Pull the power plug out of the power socket.
2) Take out the fuse holder on the rear side of the unit by screwdriver.
3) Take out the broken fuse, and replace it with a new one.
4) Put the fuse holder back in place.
2. Replacing the filtering sponge.
1) Take out the suction nozzle, remove the filtering sponge.
2) Replace it with a new one.
3) Fix up the suction nozzle.
SECTION 1 General Description
The unit is designed for picking up SMD elements, chips, resistors, condensers and
other mini components or articles. Easy to operate. With the built-in air pump, it is
no need to connect with the outside air system. After power on the winding wire
inside, under the ambient magnetic field effect, the vibrating arm begins to vibrate,
and the leathern bowl will absorb or emit air, so it can pick up and place the article.
SECTION 2 Specifications
Power consumption 15W
Pump Diaphragm
Max Suction 0.06MPa
Dimension 130(L)
×
160(W)
×
110(H)mm
Weight About 1.9Kg
Sucker
6*1.2mm
、
8*1.2mm
Needle head
16G (
Inner Dia
1.10/
External Dia
1.15)
Needle mouth BPN-15G/ Big
Springe needle Two springe needle
SECTION 3 Feature
* Easy to pick up SMD elements, flat chip, resistor, condensers, and other mini
components or articles.
* Built in air pump, no need to connect to the air system outside.
* Controlled by pedal switch, save energy and prolongs its service life.
*Vacuum suction stepless adjustable, the max powerful suction can reach up to
0.06MPa.
* One suction pen design, the powerful suction can reach up to 120g.
* Made up with eliminating static charge material, more safe to sensitive
Page1
Page4
