OPERATION MANUAL
Press “
-
” Press “
-
”
unit:
℃
sense: IR
T0: 090
℃
unit:
℃
Senser: IR
type: desolder
D. Modify Laser Alignment Mode
For instance: Modify the laser alignment mode and set it to “on”.
Press “
-
”
Press “
SET
”
type: desolder
laser: off
select: 1
type: desolder
Press “-”or“+”
Press “OK”
laser: on
type: desolder
type: desolder
laser: off
type: desolder
laser: on
1. After finishing the modification, the next step is the communication speed, will not be able modified by
keyboard.
2. Press “EXIT” key to exit. Now, the system has saved all parameter settings, the window will display:
TC:022
℃
Tb:019
℃
ready for flow
3. After all technological parameters have been selected, press “BEGIN” key and the system perform the
set flow.
E．
System Instruction
1. In the initial state, if the top sensor or outer sensor is broken, it displays:
Page 11
