Quick HC 1712 2B, User Manual

Page: 19 / 48

19
GB
HECTOR 1700/2300W - REV003A
MAINTENANCE - USAGE
WARNING: make sure the electrical power to the motor
is switched off when working manually on the windlass.
Carefully remove the chain or rope from the gypsy or the
rope from the drum.
Quick
®
windlasses are manufactured with materials resistant
to marine environments. In any case, any salt deposits on the
outside must be removed periodically to avoid corrosion and
damage to the equipment.
The parts where salt may have built up should be washed thor-
oughly with fresh water.
Once a year, the drum and the gypsy are to be taken apart as
follows:
GYPSY SIDE/DRUM
Using the handle (35) remove the bush (31) loosen the screws
(30), remove the gypsy cover (29) or the drum (32); extract the
top clutch cone (28); loosen the fi xing screws (34) of the rope/
chain stripper (33) and remove it. Pull off the gypsy (27).
Clean all the parts removed to avoid corrosion and grease
(with marine grease) the shaft thread (4 or 5) and the gypsy
(27) where the clutch cones rest (26 and 28).
POS. DESCRIPTION CODE
22 Sensor KNREEDCL1M00
23 External circlip ø 62x2 MBAN62201000
24 Oil seal PGPRL3562070
25 Reinforcement washer MBR335040X00
26 Bottom clutch cone 3000W MSF30AGN0000
27 Gypsy 3000W 12-13mm ZSB301213000
28 Top clutch cone 3000W MSF30AGS0000
29 Gypsy cover 2300W HC SGMSGB23HC00
30 Screw MBV0825MXCE0
31 Clutch bush HC2300 MSDFRHC23000
32 Drum 2300W HC ZSGMSE23HC00
33 Rope/chain stripper “HC265”
stainless steel
MSN10HCX2650
34 Screw MBV0830MXCE0
35 Bent anchor winch lever ZSLMSHR10000
36 Bearing 6206 MBJ620600000
37 Worm screw “HC265” MSLVT10HC265
38 Bearing 6307 MBJ630700000
39 Seeger MBAN8025Y000
40 Oil seal PGPRL3580100
41 2300 “HC” motor flange SGMSVFM2300H
42 Screw MBV0816MXCE0
43 Electric motor 2300W EMF232400000
44 Stainless steel “HC265”
support bracket
ECBNXHC26500
45 Shaped copper bracket
“HC265” DX
ECBRAHC265DX
46 Shaped copper bracket
“HC265” SX
ECBRAHC265SX
47 Contactor unit T520 E R T 6 3 1 5 2 4 0 0 0
48 Screw MBV0616MXCE0
49 Self-locking nuts MBD06MXET000
50 Washer MBR05X000000
51 Grower MBG05X000000
52 Screw MBV0510MXCE0
53 Casing gasket “HC265” PGCRHC265000
54 Casing “HC265” SGMCRHC26500
55 Screw MBV0630MXCE0
56 O-ring PGR031180000
57 Cable outlet PPSPHC000R01
58 Studs MPB121000XF0
59 Washer MBR12X000000
60 Grower MBG12X000000
61 Nut MBD12MXEN000
62 Screw MBV0806MXVEP
Gypsy free Gypsy locked on the right
USE OF GYPSY LOCK HANDLE CONTROL