GP
Series
EN
GP
Series
QUICK
GPSeries
INSTALLATION AND USER’S MANUAL - REV000A
6
2.0 - Standard supply and material included in the package
• Windlass
• Reversing contactor box
• Base gasket
• Lever
• Screws for assembly
• Installation and user’s manual, Warranty
• Drilling template
2.1 - Tools required for installation
GP2
• Drill with bit: Ø 9 mm (23/64”) and Ø 11 mm (7/16”)
• Hollow mill Ø 40 mm (1” 9/16)
• Hex wrench: 13 mm
2.2 - Recommended Quick
®
accessories not included
• Controls for control board UP/DOWN
• Push-button panel
• Foot-operated switch
• Hydraulic-magnetic circuit breaker
• Anchor chain counter
• Control system via RRC radio
2 - Supply and equipment
BEFORE USING THE PRODUCT, PLEASE READ THIS USER’S MANUAL CAREFULLY. IF IN DOUBT, PLEASE CONSULT YOUR QUICK® DEALER.
3.0 - Important notes
This manual features Warning and/or Caution symbols that are important for safety.
Please follow the instructions provided.
Warning
symbol for dangerous
situations.
Caution
symbol to prevent direct or
indirect damage to the product.
This manual provides boat manufacturers and nautical equipment installers with instructions on how to assemble the specified
Quick
®
product and operate it correctly
.
3 - Introduction
