25
DV5 1700/2000/2300/3000W - IT EN - REV002B
EN
MAINTENANCE
WARNING:
make sure the electrical power to the motor is switched off when working manually on the windlass. Carefully
remove the chain or rope from the gypsy or the rope from the drum.
Quick
®
windlasses are manufactured with materials resistant to marine environments. In any case, any salt deposits on the outside must
be removed periodically to avoid corrosion and damage to the equipment.
The parts where salt may have built up should be washed thoroughly with fresh water.
Once a year, the drum and the gypsy are to be taken apart as follows:
DRUM VERSION
Use the handle (1) to loosen the bush (3); pull off the drum (4) and the top clutch cone (7); loosen the fixing screws (33) of the rope/chain stripper (35)
and remove it. Pull off the gypsy (8).
NO-DRUM VERSION
Use the handle (1) to remove the gypsy cover (5); remove the top clutch cone (7); loosen the fixing screws (33) of the rope/chain stripper
(35) and remove it. Pull off the gypsy (8).
Clean all the parts removed to avoid corrosion, and grease the shaft thread (27,28,29 or 30) and the gypsy (8) where the clutch cones
rest (7 and 9) (use grease suitable for marine environment).
Remove any oxide deposits from the terminals of the electric motor and the solenoid unit / reversing solenoid; grease them.
49
48
47
1
2
3
4
16
17
18
19
20
21
22 23
24
5
26
26
26
26
31
31
32
32
33
34
35
36
37
44
27
28
29
30
6
14
6
6
7
9
15
43
45
46
10
11
12
13
13
8
38
39
40
41
42
50
51
25 22
33
Summary of Contents for DV5 1700 DC
Page 2: ......
