11
INSTALLAZIONE
IT
RETRACTABLE THRUSTER BTR185 - IT GB - REV004B
0
12
A
B
9)
Regolare il fine corsa sollevandolo verso l’alto (fig.
9
/ part.
A
) facendo toccare la sua leva (B) sul cilindro dell’attuatore
fino a che il LED LA STATUS diventerà di colore rosso.
FIG. 11
FIG. 9
FIG. 12
A
10)
Fissare l’interruttore di fine corsa in questa posizione agendo sul-
le viti di serraggio (fig.
10
/ part.
A
).
11)
Interrompere l’alimentazione al propulsore BTR per almeno cin-
que secondi (fig.
11
) (in questo modo si resetta l’errore di elevato
assorbimento).
12)
Alimentare il propulsore BTR.
13)
Abilitare un comando TCD collegato al propulsore BTR (fig.
12
) per
aprire il propulsore e renderlo operativo.
14)
Disabilitare il comando TCD in precedenza abilitato per chiudere il
propulsore.
15)
Verificare che la chiusura del propulsore sia avvenuta corretta-
mente e nella posizione voluta controllando che il LED LA STATUS
sia di colore rosso (fig.
8
/ part.
C
).
16)
Accertarsi che la protezione di elevato assorbimento non sia inter-
venuta (il LED ERROR deve essere spento - fig.
8
/ Part.
D
).
Nel caso in cui sia necessario mantenere leggermente aperto il portel-
lo di chiusura del propulsore BTR, spostare l’interruttore finecorsa di
chiusura verso l’alto. Una volta effettuata questa regolazione ripetere
i punti
12
,
13
,
14
,
15
,
16
della procedura.
FIG. 10