For support email [email protected] or call 518.452.5995.
17. Drip Tray (09) Drain
18. Water Source Switch
This switch is for low-water alarm & solenoid power.
( 0 = Tank, I = Plumbed )
19. LED Lights ( 0 = Off, I = On )
20. Water Source Ball Vale Switch
( 0 = Tank, I = Plumbed )
21. Braided Water Line Inlet
DIRECT PLUMBING THE VETRANO 2B EVO
01.
Switch 18 & 20 to ‘I’
02.
Attach the included braided water line’s angled end to 21
03.
Attach the other end to your water source using the provided
John Guest fitting. The tubing needs to have a clean rounded cut
using a tubing cutter or a sharp razor blade. Then insert the
tubing into the John Guest fitting until it it secured. (Not using John
Guest? Click here to purchase 3/8” Male BSPP fitting.)
04.
After connecting both to 21 & your water source, turn the
water source on and inspect for leaks before turning the machine
on.
05.
Turn the machine on and check that the pump does not fill for
longer than 60-seconds. If it does - turn the machine off again
and see if the water source is supplying the machine with water.
18 19
22
20
21
17
