Quick Heal Technologies HM1S, User Manual, Page: 77 / 80

Settings
77
Factory Reset
With Factory Reset option, you can reset the QHHS settings to default settings. All the user data
and your settings, except the product registration information, are removed. Hence, it is
advisable to use this option only when it is required.
To perform a factory reset,
Log on to the QHHS Web portal https://myhs.quickheal.com .
Click the Settings menu and then click System.
In the Factory Reset section, click Reset.
Confirm your action.
Alternatively, you can long press the Reset button on the device to factory reset.
Note: It may take a few minutes to reset. After factory reset, the
network that you created
will be removed. You need to do unboxing through the default network: HS-Unbox.
Tips:

Check the connection lights on the QHHS device. Wait until all the connection lights turn
on.

Once all the connection lights on the QHHS device turn on, connect to the default
network HS-Unbox, open the browser and run the link
https://myhs.quickheal.com .
Follow the unboxing process to register QHHS once again.

If there is any issue in connecting the network, switch off the power of the QHS device
and then switch the device on again.
Firmware Upgrade
The Firmware Upgrade section shows the available system upgrade and the current version of
the system.
If there is any upgrade available, the system will be upgraded automatically. If there is a
difference between available system upgrade and the current version of the system, you can
upgrade the system manually.
To upgrade the system,
Log on to the QHHS Web portal https://myhs.quickheal.com .
Click the Settings menu and then click System.
In the Firmware Upgrade section, click Update.
On the confirmation dialog, click Yes.
The use of Firmware Upgrade may result in loss of connectivity and/or
configured settings.