Quick Charge SCP Quick Start Instructions Download Page 12

                         QUICK CHARGE Select-a-Charge Battery Chargers

 

“LIMITED WARRANTY” 

 

Quick Charge Corporation warrants this line of chargers for three (3) years from the date of 
purchase. After the warranty period, chargers returned to the factory for repair will be charged a 
minimum rate of $25.00. Charger will be returned, freight and repair charges, C.O.D. unless other 
arrangements have been made. This warranty covers all defects in manufacture and 
performance, provided the unit is operated in compliance with manufacture’s operating 
instructions. 
For repairs to be made at the Quick Charge factory, a charger and/or component(s) should be 
sent, freight prepaid to Quick Charge at:                                                                                                                              
 

 

 

           Quick Charge Corp. 

1032 S.W. 22nd St. 

    Oklahoma City, OK. 73109 

 

Quick Charge, will at it’s option, repair or replace the charger or component in question. The 
repaired item will then be returned, freight prepaid by Quick Charge. This warranty is void if the 
charger or component have been altered, changed, or repaired by anyone not authorized by 
Quick Charge, or if the charger or component, have been subjected to misuse, negligence, or 
harsh environmental conditions. (Except those chargers designed for such conditions) 
If returning the charger to the factory is not practical, replacement parts may be shipped to the 
customer for field repair at no charge. On parts such as circuit boards, the customer will be 
required to return the board suspected to be defective to Quick Charge, freight prepaid. If such 
defective parts are not returned, the customer will be invoiced for the repair parts. Field repairs 
are made at the user’s own risk. “Authorization” by Quick Charge to repair refers to maintaining 
the warranty only. Quick Charge assumes no responsibility or liability for field servicing, and shall 
not be responsible for incurred travel or labor charges. 
Quick Charge corporation shall not in any event be liable for the cost of any special, indirect or 
consequential damages to anyone, product or thing. This warranty is in lieu of all other warranties 
expressed or implied. Quick Charge neither assumes nor authorizes any representative or other 
person to assume for us any liability in connection with the sale of this product. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SCP













Reviews: