Quick Charge QP Operating Instructions Manual Download Page 4

DO NOT USE THIS CHARGER  ON A TWO  POLE 
UNGROUNDED  OUTLET  OR ATTEMPT  TO  BREAK OFF 
THE  GROUND PRONG FOR USE ON A RECEPTACLE  OR 
EXTENSION  CORD NOT HAVING  A GROUND. 
 

 If  an extension  cord must  be used, make  sure  it is  in  good 
condition.  Use a three  conductor  cord no smaller  than  the size 
being  used on the charger,  and  keep it  as short  as possible.  The  use 
of an improper  extension  cord could  result  in  a risk  of a fire  or 
electric  shock. Locate  all  cords so that  they  will  not  be stepped on, 
tripped  over,  or otherwise  subjected  to damage  or stress. 
 

OTHER  SAFETY  INFORMATION

 

Do not use charger  if  it  shows  signs  of physical  stress, or if  DC 
output  leads  or connector  feel  hot  when  used. 
 
Do not disconnect  the  DC output  clamps,  or connector  from  the 
batteries  when  the charger  is  on. The  resulting  arcing  could  cause 
the  batteries  to explode. 
 
Do not expose charger  to rain. 
 
The  charger  will  become  hot during  use, provide  adequate  air  flow 
around  it.  Do not place  charger  on cloth  or vinyl  seats,  blankets,  or 
around  any  other obstructive  materials.  Do not place  charger 
against  walls,  allow  12” of space on all  sides. 
 

 

BATTERY  SAFETY  & CARE  INFORMATION

 

Always  wear protective  eye shields  and clothing  when  working 
with  batteries.  Batteries  contain  acids  which  can cause bodily 
harm.  Do not  put wrenches  or other  metal  objects across the 
battery  terminal  or battery  top. Arcing  or explosion  of the  battery 
can result.  Do not  wear jewelry  when  working  around  batteries. 
Arcing  can  cause severe  burns. 
 
The  tops of the batteries  and battery  hold  downs  must  be kept clean 
and dry at all  times  to prevent  excessive  self  discharge  and flow  of 
current  between  the battery  post and frame. 

Summary of Contents for QP











Reviews: