14
Angled position
Straight position
B
A
SET UP ASSEMBLY OF THE MINI SOIL CONDITIONER
__
The mini soil conditioner is shipped with
the caster wheel arms in the raised
position.
To place them in the “working”
position, remove the bolt from hole
A
and
lower wheel arm fully. Then installthe bolt
in hole
B
.
The side wings can be installed on the front
side of the frame (for forward movement) or
the back side (for backward movement)
depending on the desired mode of work. To
switch them from front to back, you will need to
swap them end for end. (i.e. the right front
wing will mount on the left rear).
The side wings have two holes for mounting in
a “straight” position or an “angled” position.
The angled position is convenient when
windrowing material to either the right or left
side. It is recommended that you remove the
wing on the “windrow side” to prevent
damaging it.
NOTE:
The mini soil conditioner can be
operated with both wings removed if desired.
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*