6
5.2 Rear Panel Description
Schematic diagram of the rear panel
1)
RF signal input.
2)
RS232 interface (Console): Used for configuring the network management
parameters.
3)
LAN interface: correspond with IEEE802.3 10Base-T, used for network
management.
4)
Optical signal output: This interface is the optical signal output port of the device.
The connector type is FC/APC. There is an invisible laser beam from this port
while working normal. So the port should not be aligned to human body or naked
eye to avoid accidental injury.
5)
Power input 1(Reserved port, configured dual power or not is decided by the
user).
6)
Power input 2.
7)
Ground stud of the chassis: used for the connection of the device and ground
wire.
8)
Fan outlet.
1
2
3
4
5
6
7
8
Optical Transmitter
User Manual
L-RF-4mW-TX
www.questtel.com