Wuhan Questt Asia Technology Co., Ltd
Address:
A7-101, Hangyu building, Wuhan University Sci & Tech Park, East Lake High-tech Dev. Zone, Wuhan, Hubei, China
Email:[email protected]
4
German Technology | Made in China
2-1 Machine preview:
Attention:
1. The laser system requires 380V 50HZ power supply. Water cooling system requires 220V
50HZ power. Any damage caused by misconnect is not obliged by seller.
2. Current ranges from 60-200A, and pulse ranges from 1ms -5ms. The frequency is 4Hz for
spot welding and 20Hz (or above) for continuous welding.
3. Make the laser chamber up and down by twisting the wheel-bar until you find the beam
lightest, roundest and sounds loudest. That means the best laser is ready with correct focal
length. To avoid penetration of material, you may decrease the current or enlarge the
facula to weaken single power.
4. Do not energize equipment before installation to avoid electric shock or other dangerous
accidents.
5. The standard protection mat is plastic. When it
’s worn out, glass plate of exactly same size
with the table would be recommended.
6. The water inside the chiller has to be replaced once a month. Deionized water is preferable,
but drinking water is also fine.
2-2 Hardware installation:
