background image

(+) terminals and those linking the 3 (-) terminals, should remain in place.

If the speakers are to be bi-wired there will be a pair of twin cables from the
amplifier. One twin cable should be connected to the terminal marked lo and
the links between it and the terminals marked mid should be removed. The
other cable can be connected to either the terminals marked Mid or Hi, but
the links must remain in place. With both twin cables the hot or positive wire
should go to the (+) terminals and the cold or negative wire to the (-) termi-
nals.

If the speakers are to be tri-wired there will be 3 twin cables from the amplifier.
The hot or positive cables should be connected to the 3 (+) terminals and the
cold or negative cables to the 3 (-) terminals and all the connecting links
removed.

4.2.3  Bi-Amped Operation

If the speakers are to be run bi-amped 2 amplifier channels will be used to
drive each monitor. One amp channel should be connected to the either the
terminal marked Mid or Hi and the link between these terminals kept in place.
Another channel should be connected to the terminal marked Lo and the links

AMPLIFIER

Passive operation, but with tri-wired connection : 3 twin cables are run from 
the amplifier. One wire should be connected to the terminal marked Lo, the
second to the terminal marked mid and the final wire connected to the terminal 
marked Hi. All links should be removed. The hot or positve wire should go to 
the (+) red terminal and the cold or negative wire to the (-) black terminal.

Hi

Mid

Lo

All links removed

AMPLIFIER

or

Passive operation, but with bi-wired connection. A pair of twin cables 
is run from the amplifier. One wire should be connected to the terminal
marked Lo and the links between Lo & Mid should be removed. 
The other wire can be connected to either the terminal marked Mid or Hi
but links must remain in place. With both the twin cables the hot or positive
wire should go to the (+) red terminal and the cold or negative wire to the 
(-) black terminal.

Hi

Mid

Lo

and

Links between Lo & Mid removed

Page 8

Summary of Contents for VH3208
















Reviews: