7
Instruction version: 4
Screen Shelter
side wall full instructions
Optional Extras : Side Walls
You can purchase additional side wall blinds for your screen shelter, which attach to the outside of
your screen shelter and give you extra privacy, cover and protection.
Attaching the optional side wall blinds to the Screen Shelter
• Remove the sidewall(s) from the packaging.
• Unfold the sidewall. Attach the clip found on the top left corner of the side wall on the roof frame
pole as close as possible to the corner joint. This ensures that the side panel cannot slip down
when in use.
• Then move down the pole and clip the mid point of the sidewall to the pole using the clip on teh
end of the webbing strap.
• Once both have been done, you finally place the hook on the D-ring located at the bottom of the
leg pole.
• Repeat this on the other side of the sidewall.
Removing optional side wall blinds from the Screen Shelter
• Un-clip the hook at the bottom of the sidewall.
• Then unclip both clips from the frame and repeat the process on the other side of the side wall.
NOTE
: Please remember that the side walls should not be stored away wet. If they are placed
away wet, please take them out and dry thoroughly before storing away.
Optional Extras : Front Canopy
You can purchase a front canopy for your Screen Shelter, which gives you a covered canopy area to
the front of the screen shelter.
• Take the canopy out of the bag and clip the top left corner onto the shelter frame. It goes on the
top pole next to the corner joint to ensure that it cannot come down the leg.
• Then clip the lower clip into place and finally place the hook on the D-ring located at the bottom
of the leg pole.
• Repeat the above on the right hand side.
• Then take a front pole and place the pin though the eyelet in the front of the canopy and peg out
using the storm strap.
NOTE
: Please remember that the canopy should not be stored away wet. If they are placed away
wet, please take it out and dry thoroughly before storing away.
