4
Template version: 3
F1302 :
Ragley Pro comfort full instructions
image 1
image 2
Video Link
Folding and Unfolding
• Take the chair from the bag and stand the chair upright as shown (image 1), standing at the
side of the chair with one hand of the back rest and one hand on the arm rest push these apart
by pushing in opposite directions. Once the chair has started to open make sure the two-arm
rest are free from there locking position by just lifting each one slightly, then you will be able to
push the chair fully open by pushing the back rest and arm in opposite directions. If the chair
does not want to open as shown, then the arms may be pushed back too far and caught on the
back rest. If this is the case, release the arms by moving them forward and then try again.
• When you have the chair open with the legs fully apart (image 2) you can pull the back rest up
into the upright position and push the arms down to lock the back rest in place.
• Now slide the side table from under the chair and locate onto the locking pin on the side of the
chair (images 3 - 5).
• When you want to adjust the back rest whilst sitting in the chair just lift the arms up slightly and
push the back rest back or pull forward on the arms.
• When folding the chair make sure you unclip the side table and slide it back under the chair first.
• Then lifting both arms up slightly to release them from their locking position, pull arm on the
arms rest and pull the back of the chair forward until the chair is closed, you might then need to
fully close the chair by pushing the frame together.
You can also follow this process using the QR code below or going directly to the URL :
https://youtu.be/ztAdyTgmKxY
