Quest Engineering The EDGE eg5, User Manual

Page: 53 / 89

Viewing measurements on the display
Locking or securing your dosimeter during run
053-669, Rev A eg5
45
Viewing measurements on the display
The up/down arrows on the keypad of the dosimeter enable you to
move through the various measurements. For specific information on
the views of the Edge, please see “Views on the Edge”, page 20).

Viewing measurements
1. Press the up arrow or the down arrow . This will move
you through the views on the display.
✍
NOTE: If you enabled only one measurement to appear on the display,
when you press the up/down arrows it will not show any other
measurement values.
Locking or securing your dosimeter during run
As explained previously under QSP-II set-up parameters, the security
or lock feature is designed to lock the meter during run to ensure the
study will not be stopped unless the lock feature is disabled. (Setting
this feature is programmed via QSP-II. Please see “Security: setting
secure/lock feature”, page 29 for more details.)