Customizing set-up parameters in QSP-II
Security: setting secure/lock during your run
053-669, Rev A
eg5
30
How to set-up secure/lock
1.
Ensure the Edge is docked and the USB cable is connected from the pc to
the EdgeDock.
2.
From the welcome screen of QSP-II, select the Edge and click on the
Setup button (see Figure 3-1, page 17).
3.
Next, click on eg5 (if not selected), click on the Configuration tab, and
click the Security tab.
4.
Ensure Select All is checked and/or the dosimeter is checked (if using
more than one bay, click on the appropriate dosimeters.)
5.
Select one of the secure/lock settings by clicking in one of the
checkboxes.
6.
To change other settings, see settings sections (dosimeter tab, set tab,
auto on tab, or clear tab).
7.
Or click Save As to save the new set-up and name the settings.
8.
Alternatively, click Save to change the Edge setup under “Saved Setup”.
Then, click Send setup to Instrument.
Figure 3-9: Secure/Lock setting
Setting lock mode
Click on one of
the lock modes.
Security
Edge Bay Charger
Select
All
**Or**
Click on the
docked eg5
Send setup to eg5
Summary of Contents for The EDGE eg5
