QX-300
USER MANUAL
|
03
QUESTAUDIO.NET
•
Do not expose the unit to any moisture
whether rain, water, or other liquids. Exposure
to moisture could result in damage to internal
components or electrocution\circuit failure.
•
Do not cut, kink, or otherwise damage or
modify speaker cable. Ensure a speaker cable
with a core diameter of at least 0.75mm2 is
used for specified performance.
•
Do not install or place speaker cables or
this device near heaters, high traffic areas
or any area where the cables or device can
be damaged.
•
Avoid installing or mounting speaker
boxes, amplifiers, electronics or cabling
in unstable locations.
•
In the event of storms and/or lightning, ensure
all devices are disconnected from mains power
in order to prevent damage to any of the units
in the system.
•
When cleaning the unit, ensure it has been
disconnected from any power source and that
only a dry cloth is used. Do not use any aerosol
or liquid-based cleaners.
•
Ensure all electronics are electronically
grounded (earthed) to a safety ground
terminal in order to avoid electric shock.
Do not ground any device to a gas pipe as
this may result in fire.
•
Servicing of all electronics should only be
carried out by a certified Quest technician.
Please consult your original place of purchase
to find the location of your nearest Quest
service centre.
•
When installing amplifiers and/or other
electronics only use the hardware specifically
designed for this product.
GENERAL CAUTION
