![background image](http://html1.mh-extra.com/html/quest-engineering/qx-300/qx-300_user-manual_772401002.webp)
QX-300
USER MANUAL
|
02
QUESTAUDIO.NET
PRODUCT OVERVIEW
The QX-300 Amplifier is a compact, 2-channel, one third RU, high fidelity solution for both high (70/100V)
and low impedance (4 -16Ohm) distributed audio systems. The amplifier has automatic load sensing for
low impedance and 70V line operation and can output 100V in bridged mono mode.
The QX-300 can be used as a stand-alone amplifier, or with the available mounting accessories for
additional installation flexibility. Three units can be mounted in 1RU or 10 units can be mounted in 3RU.
For ease of operation the front panel features recessed volume controls and status indicator lights. A
removable magnetic cover doubling as an air intake filter hides Automatic Standby, Bridged Mono, 80Hz
High Pass Filter and Limiting selection switches. The Auto Standby function will mute the amplifier after 10
minutes of no audio signal presence and after 30 minutes the amp will enter a sleep mode, which allows
it to draw less than 0.5W (QX-300A) or 2.5W (QX-300D). Typical power-on from mute is <1ms and from
sleep mode is 660ms.
SAFETY PRECAUTIONS
•
Please read the instructions in this section carefully before use.
•
Ensure all instructions in this manual are observed as all information contained within is very important.
•
It is also highly recommended that this manual is retained for future reference.
SAFETY SYMBOL & MESSAGE CONVENTIONS
The safety symbols described are used in this manual to prevent bodily injury and property damage which
could result from mishandling. Before operating this product, please read this manual first, in full so you
that you are thoroughly aware of any risks.
Indicates a potentially hazardous situation which,
if mishandled, could result in serious personal injury or death.
WARNING