HPi
110 &
HPi
210
Quick Rig (QR) Systems
User Manual
HPi110 & HPi210 Quick Rig (QR) Systems
11
Installing an HPi110 becomes easy with the
QR wall-mounting system .
Once the spine has been installed (as
described above) install the wall-mount as
follows:
1 . Bolt the wall mount assembly (without
the speaker attached) onto the wall .
2 . Lift the speaker (now installed with
Spine) and hook it onto the wall-mount .
The wall-mount is designed to safely
support the weight of the box from this
point .
3 . Set the angle by sliding the quick-pin
into the right hole (see next section for
angles) .
HPi110 with
i-Spine
Fixed hook
assembly
HPi110 with Kit QR2 Standard
HPi110 with Kit QR2 Long Side Plates
7 .5 degrees
15 degrees
30 degrees
0 degrees
Setting the Angle of the Cabinet
Once the speaker has been mounted correctly, the angle at which the speaker will be fixed can be
adjusted by fitting the Q-Pin into the correct hole . Four angles are available:
The standard kit offers the possibility to hang
a speaker at 0˚ and 7.5˚.
If extra tilt (15˚ or 30˚) is needed, optional
extension plates can be purchased separately
and inserted in the wall-mount assembly .
