manualshive.com logo in svg

Quest Engineering DL4300, User Manual

Share
Download
Quest Engineering DL4300 User Manual Download Page 299

DL4300 Appliance

Adding a machine to existing replication

299

Denying a replication request

Complete the steps in the following procedure to deny a replication request sent to a third-party core from a

customer.
To deny a request without reviewing it, see 

Ignoring a replication request from a customer

.

1. On the target Core, navigate to the Rapid Recovery Core Console.
2. From the icon bar, click   (Replication).

The Replication page appears.

3. On the Replication page, click Request (#).

The Pending Replication Requests section appears.

4. Under Pending Replication Requests, click the drop-down menu next to the request you want to review,

and then click Review.
The Review Replication Request window appears.

5. Click Deny.

Replication is denied. Notification of denial appears under Alerts on the Events page of the source Core.

Parent topic  

Ignoring a replication request from a customer

As a third-party service provider of a target core, you have the option to ignore a request for replication sent from

a customer. This option could be used if a request was sent by mistake or if you want to deny a request without

reviewing it.
For more information about replication requests, see 

Reviewing a replication request from a customer

.

Complete the following procedure to ignore a replication request from a customer.

1. On the target Core, navigate to the Rapid Recovery Core Console.
2. From the icon bar, click   (Replication).

The Replication page appears.

3. On the Replication page, click Request (#).

The Pending Replication Requests section appears.

4. Under Pending Replication Requests, click the drop-down menu next to the request you want to ignore, and

then click Ignore.

5. On the Ignoring request dialog box, click Yes to confirm the command.

Notification that the request has been ignored is sent to the source Core, and the request is removed from

the Replication page on the target Core.

Parent topic  

Adding a machine to existing replication

After replication is established between a source and target Core, it is possible to add new protected machines to

replicate to the target. Complete the steps in the following procedure on the source Core to add a new protected

machine to a paired target Core for replication.

Summary of Contents for DL4300





























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands