DL4300 Appliance
Approving a replication request
298
g. Do one of the following:
▪
If you cleared the Add all Agents to Seed Drive check box, click Next.
▪
If you selected Add all Agents to Seed Drive, go to
.
h. On the Machines page of the Replication Wizard, select the protected machines you want to
replicate to the target core using the seed drive.
9. Click Finish.
10. If you created a seed drive, send it as directed by your third-party service provider.
Parent topic
Reviewing a replication request from a customer
After an end user completes the procedure
Submitting a replication request to a third-party service provider
, a
replication request is sent from the source core to the third-party target core. As the third party, you can review the
request, and then approve it to begin replication for your customer, or you can deny it to prevent replication from
occurring.
Choose from the following options:
•
Approving a replication request
•
Parent topic
Approving a replication request
Complete the following procedure to approve a replication request on a third-party target core.
1. On the target Core, navigate to the Rapid Recovery Core Console.
2. From the icon bar, click (Replication).
The Replication page appears.
3. On the Replication page, click Request (#).
The Pending Replication Requests section appears.
4. Under Pending Replication Requests, click the drop-down menu next to the request you want to review,
and then click Review.
The Review Replication Request window appears.
NOTE:
The information that appears in the Source Core Identity section of this window is determined
by the request completed by the customer.
5. Under Source Core Identity, do one of the following:
•
Select Replace an existing replicated Core, and then select a core from the drop-down list.
•
Select Create a new source Core, and then confirm that the Core Name, customer Email Address, and Customer
ID, provided are correct. Edit the information as necessary.
6. Under Agents, select the machines to which the approval applies, and then use the drop-down lists in the
Repository column to select the appropriate repository for each machine.
7. Optionally, in the Comment text box, enter a description or message to include in the response to the
customer.
8. Click Send Response.
Replication is accepted.
Parent topic
