3
Instruction version: 4
C0023 :
Bug Stop Magnetic door mesh full instructions
Installation instructions
• Lay your magnetic door mesh flat on the floor with magnets aligned in the centre as show in the
diagram on the right. Note that the top panel will have a larger gap between the magnets and the
trim versus the bottom panel.
• Check each magnet to ensure they attract to each other symmetrically.
• Peel the adhesive backing off of the velcro strips and apply to the magnetic door mesh according
to the diagram.
• Take Panel A and peel off velcro strip 1 and apply to center of door frame with pressure. Be sure
to hang the screen high enough so that it does not drag on the ground. Repeat for velcro strips 2
and 3.
• Take Panel B and peel off velcro strip 7 and apply to opposite center of door frame with pressure.
Be sure to hang the screen high enough so that it does not drag on the ground.
• Repeat for velcro strips 8 and 9.
• Ensure the magnets are property aligned and connected in the center.
• Attach the remaining velcro strips in place, starting with 4 - 6 and then onto 10 - 12.
Quest manual download site
The quest manual download site can
be found at the url below, or the QR
code below
http://www.questleisure.com/manuals
.
The full instructions are also
available on the Quest Leisure
manuals download as shown above
Additional Tips
• For plastic frames, only use the
velcro strips.
• For wooden frames, you can also
use the wood tacks provided.
• Please note, the wood tacks leave
puncture holes.
• If magnets do not snap shut together,
adjust the width positioning of the
mesh.
4
5
6
Magnets
3
2
1
7
8
9
A
B
10
11
12
