Queenstone 07B Owner'S Manual Download | Manualshive

Page: 24 / 35

background image

22

Mounting the battery:

1. Hold the battery and plug in the battery to the battery holder box located below the

wheelchair seat(Fig. G1).

G1

Charging the Battery

The battery can be charged with normal AC power (AC 110-220 V, 50-60 Hz). The charging port

is located under the front part of the control panel. Before charging, ensure the chair is powered

off.

1. Plug the charger 3-pin cable into the charging port under the front part of the

control panel (Fig. G2)

2. Plug the other side of charger into a power outlet. When the red LED is on, it is charging.

3. When the LED on the charger changes from red to green, keep charging for an additional 30

minutes to allow the battery to be fully charged.

4. Pull out the off-board charger from the power outlet before unplugging from the charging

port of the control panel.

5. Please charge the battery in an appropriate temperature. The recommended ambient

temperature for charging is between 5

°

C to -40

°

C.

G2

Ⅹ

. Battery

«
...
22
23
24
25
26
...
»

Summary of Contents for 07B




































Reviews:

No comments

Related manuals for 07B

Brand: identités Pages: 13

Brand: identités Pages: 15

Brand: identités Pages: 14

DELTA EVOLUTION

Brand: identités Pages: 14

Brand: identités Pages: 13

Brand: Schuchmann Pages: 24

Brand: Schuchmann Pages: 28

rifton dynamic pacer

Brand: Schuchmann Pages: 44

Brand: TGA Pages: 16

Brand: Vermeiren Pages: 80

Brand: Adaptive Solutions Pages: 2

Brand: Mobiak Pages: 2

Brand: Mobiak Pages: 3

Brand: Mobiak Pages: 9

Brand: SUMMIT LIFTS Pages: 8

Brand: Mackworth Pages: 12

Brand: Vitea Care Pages: 6

Brand: Vitea Care Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands