ORIGINAL LINE M
12
INSTALLATION AND START-UP
Positioning
Electrical connection
Place the machine on a flat horizontal surface that will support the weight of
the machine.
Make sure air is able to circulate behind the machine
(minimum 10cm).
Note
IMPORTANT!
Connect the plug to a separate earthed wall socket.
220-230 V 50-60Hz, 10 Amp.
M-1, M-2, THERMOS M, MEGA GOLD M
DM-4
The brewer is not reconnectable and may only be installed to the electric
supply network with a voltage that is stated on the brewer and shall be carried
out by an authorized electrician.
Recommended: install a line circuit breaker and a earth fault breaker to the
machine.
CAUTION!
Connection to a separate 2 phase only
- Brewer should be connected to 400V with zero and earth.
- Use 10 Amp fuses.
IMPORTANT!
Electrical installations must be done of an certificated electrician: 400V 2N~
4780 W
Min. 10cm
Min. 10cm
