6
HVA/HVM
Place the machine on a flat and waterproof surface
that will support the weight of the machine.
Make sure air is able to circulate behind
the machine (minimum 10cm).
INSTALLATION AND START-UP
Positioning
Start-up procedure
MIN. 10cm
Note
Connect the supplied water hose to the cold water
connection using a ½’’ R-connection(A). When
pushing the machine into position make sure there is
no interference to the hose to ensure proper water
flow.
Water supply to the machine is the customer’s
responsibility according to instruction and advice from
the supplier.
In areas with high level lime problem, a descaling filter
should be mounted.
Insert the power plug in a separately-earthed wall
socket. (See fig.C)
Turn on the machine using the power switch(See fig.B)
that is located at the back of the machine.
The machine will now start to fill up with water and
then heat the water.
The display will flash while the machine is filling with
water (See fig.D).
While the machine is heating the current temperature
will flash in the display.
When the water has reached the preset temperature
of 90
o
C the display will show a steady light. (See fig.E)
The machine is now ready for use.
A
B
C
D
E
