10
HVA/HVM
PROGRAMMING
Set machine for manual water filling
Install the cover plug at the inlet valve (E) to avoid possible
leakage.
Note
The display will show T1, change the type of machine with buttons (B) or (C).
T1 = HVA automatic
T2 = HVM manual
Confirm the choice by holding down the buttons (B) and (C) at the same time
for approximately 5 seconds.
A
A
D
E
Use a decanter to fill up the water tank to the long sensor pin.(A)
Keep button (B) pressed while turning on the power switch.(D)
B
C
