GSM/GPRS/GNSS Module Series
MC60-TE-A User Guide
MC60-TE-A_User_Guide Confidential / Released 20 / 25
(3) Connect the antenna to the GNSS_ANT on MC60-TE-A with an RF cable.
(4) Insert the plug of the 5V power adapter. Turn the S202 switch to
ON
state on the EVB. The LED D503
on the EVB will be lighted.
(5) Send
AT+QGNSSC=1
command via main UART to power on the GNSS part, the LED D102 on
MC60-TE-A will be lighted. For details of the corresponding AT commands, please refer to
document
[1]
.
(6) Send AT commands about GNSS and get the data of GNSS via main UART
(7) NMEA data will be received via UART3.
5.4. Firmware Upgrade through Main UART Port
(1) Switch the S101 and S102 on MC60-TE-A to
ON
state.
Figure 15: Switch S101/S102 to On State
(2) Start the firmware upgrade tool on PC.
(3) Press the
START
button in the firmware upgrade tool.
(4) Switch the S201 and S202 on the EVB to
ON
state. For details, please refer to
document [4]
.
Quectel
Confidential
