GSM/GPRS/GNSS Module Series
MC60-TE-A User Guide
MC60-TE-A_User_Guide Confidential / Released 18 / 25
Figure 11: S101/S102 Switch Status on UART3 When Communicating with GNSS Part
(2) Connect the antenna to the GNSS_ANT on MC60-TE-A with an RF cable.
(3) Insert the plug of the 5V power adapter. Turn the S202 switch to
ON
state on the EVB. The LED
D503 on the EVB will be lighted.
(4) Send
AT+QGNSSC=1
command via main UART to power on the GNSS part, the LED D102 on
MC60-TE-A will be lighted. For details of the corresponding AT commands, please refer to
document
[1]
.
(5) Connect the UART3
of EVB to PC’s USB port with the USB to UART converter cable. And NMEA
data will be received via UART3 and PMTK commands can be sent via UART3.
(6) The PowerGPS tool can be used to view the status of GPS&GLONASS receiver conveniently. When
the tool is opened, the user interface as shown below will be displayed.
Figure 12: User Interface of PowerGPS Tool
Quectel
Confidential
