LTE Standard Module Series
EG21-G Mini PCIe Hardware Design
EG21-G_Mini_PCIe_Hardware_Design 47 / 54
6.7. Thermal Consideration
In order to achieve better performance of the module, it is recommended to comply with the following
principles for thermal consideration:
On customers’ PCB design, please keep placement of the PCI Express Mini Card away from heating
sources.
Do not place components on the PCB area where the module is mounted, in order to facilitate adding
of heatsink.
Do not apply solder mask on the PCB area where the module is mounted, so as to ensure better heat
dissipation performance.
The reference ground of the area where the module is mounted should be complete, and add ground
vias as many as possible for better heat dissipation.
Add a heatsink on the top of the module and the heatsink should be designed with as many fins as
possible to increase heat dissipation area. Meanwhile, a thermal pad with high thermal conductivity
should be used between the heatsink and module.
Add a thermal pad with appropriate thickness at the bottom of the module to conduct the heat to
PCB.
The following figure shows the referenced heatsink design.
Thermal Pad
Application Board
Application Board
Heatsink
Thermal Pad
EG21-G Module
EG21-G Mini PCIe
Heatsink
PCI Express Mini Card Connector
Shielding Cover
Thermal Pad
Figure 18: Referenced Heatsink Design
