GNSS Module Series
LG69T(AM,AS)_EVB_User_Guide 40 /
45
Step 6:
Click “
Start
” to start configuring the server. Once the configuration is complete, the STRSVR tool
progress bar on the screen will indicate 100%.
Figure 37: Configure STRSVR Tool
– NTRIP 4
7.4.2.
Steps for Data Transmission via TCP Protocol
Step 1:
Send
AT+QGNSSPARAM=1,1,"ip","port"
to AT port of the EG25-G to configure the LG69T (AS)
module as the
Base Station
.
Step 2:
Send
AT+QGNSSPARAM=1,0,"ip","port"
to AT port of the EG25-G to configure LG69T (AM)
module as the
Rover Station
.
Step 3:
Open
STRSVR
tool. “
(0) Input
” is the configuration of the
Base Station
and “
(1) Output
” is the
configuration of the
Rover Station
. Set the “
Type
” of “
(0) Input
” and “
(1) Input
” to “
TCP Server
”.
Figure 38: Configure STRSVR Tool
– TCP 1
