EVB User Guide
Table 5: Switches and buttons
Part
Name
I/O
Description
S1 POWER I
Control power supply from adapter
K1 STANDBY I
The module will enter into standby
mode when pressing this button, and
exit standby mode when releasing
this button.
K2 RESET_N I
Press and release this button. Then
the module will reset.
3.6.
Operating Status LEDs
Figure 9:
Operating status LEDs
Table 6: Operating status LEDs
Part
Name
I/O
Description
L1 1PPS O
Flash: fix succes
uency is 1Hz
sfully, the freq
Extinct: no fix
L2 POWER O
n
Bright: Power o
Extinct: Power off
L3 AOK O
na is short-circuit or not
Extinc
na operates normally
Bright: Active anten
assembled
t: Active anten
L10_EVB_UGD_V1.00
- 14 -
Quectel
