Quectel GNSS Module Series User Manual Download Page 22

Page: 22 / 30

GNSS Module Series

LG69T(AA,AD)_EVB_User_Guide 21 / 29

5.1.1.

Interface Explained

You can view GNSS information, such as CNR message, time, position, speed, and precision in the
QGNSS interface. To find out more about these parameters, see the following table.

Table 5: QGNSS Interface Explained

Icon

Explanation

This sky view interface shows the satellite position of the satellites
in use. The left column icon shows the satellites in use and their
number.

⚫

BDS (BeiDou): 4

⚫

GLO (GLONASS): 0

⚫

GPS: 11

⚫

GAL (Galileo): 0

⚫

QZSS: 0

⚫

NavIC

⚫

SBAS: 0

The grid map on the right shows the position of the satellites in use.

GPS satellite

BeiDou satellite

GLONASS satellite

Galileo satellite

QZSS satellite

NavIC satellite

⚫

PRN 30 CNR is 39 dB/Hz.

⚫

Column in

bright red

means that the navigation data of the

satellite is in use.

⚫

PRN 1 CNR is 21 dB/Hz.

⚫

Column in

light red

means that the navigation data of this

satellite is not in use.

Summary of Contents for GNSS Module Series































Search results

Summary of Contents for GNSS Module Series

Reviews:

Related manuals for GNSS Module Series

Brands by name

Popular brands

Quectel GNSS Module Series, User Manual

Search results

Summary of Contents for GNSS Module Series

Reviews:

Related manuals for GNSS Module Series

Brands by name

Popular brands