GL100 @Track Air Interface Protocol
¾
Set the IP Address and Port Number of Main Server
Set the IP address and port number of the main server with the
AT+GTSRI
command.
The main server will be the first choice of data sending, except in “Force on SMS mode”
Example:
Configure the terminal with the command:
AT+GTSRI=gl100,0,1,cmnet,cmnet,cmnet,
124.79.182.171
,
7001
,+8613888888888,200808071000
01
In the above command, “
124.79.182.171
” is the IP address and “
7001
” is the port number.
The configuration is done when the backend server receives the following message:
+ACK:GTSRI,359231030000010,20080807100001,20090112104725,000a,0102100203
¾
Set the Phone Number of Main SMS Gateway
Set the phone number of main SMS gate with the
AT+GTSRI
command.
SMS gate will be the backup channel for data sending when in “Force on SMS mode” or
when GPRS is unavailable in the mode “Default on GPRS”.
Example:
Configure the terminal with the command:
AT+GTSRI=gl100,2,0,cmnet,cmnet,cmnet,124.79.182.171,7001,
+8613888888888
,200808071000
01
In the above command, “
+8613888888888
” is the phone number of the SMS gateway. Short code
such as “
10086
” is also supported.
The configuration is done when the backend server receives the following message:
+ACK:GTSRI,359231030000010,20080807100001,20090112104725,000a,0102100203
¾
Set the IP Address and Port of Secondary Server
Set the IP address and port of the secondary server with the command
AT+GTBEI
.
In “TCP short-connect mode”, if the main server cannot be accessed the terminal will try to
send data to the secondary server.
Example:
Configure the terminal with the command:
AT+GTBEI=gl100,,GL100,0,
124.79.182.171
,
7003
,+8615921881331,20080807100001
In the above command, “
124.79.182.171
” is the IP address of the secondary server and “
7003
” is
the port of the secondary server.
The configuration is done when the backend server receives the following message:
TRACGL100AN002
- 32 -
Quectel
Confidential
