background image

GV75MG User Manual 

Document Title

 

GV75MG User Manual 

Version 

1.01 

Date 

2019-11-11 

Status 

Released 

Document Control ID 

QSZTRACGV75MGUM0101 

General Notes 

Queclink offers this information as a service to its customers, to support application and 
engineering efforts that use the products designed by Queclink. The information provided is 
based upon requirements specifically provided to Queclink by the customers. Queclink has not 
undertaken any independent search for additional relevant information, including any 
information that may be in the customer’s possession. Furthermore, system validation of this 
product designed by Queclink within a larger electronic system remains the responsibility of the 
customer or the customer’s system integrator. All specifications supplied herein are subject to 
change. 

Copyright 

This document contains proprietary technical information which is the property of Queclink. 
Copying of this document, distribution to others  or using or  communication of the contents 
thereof is forbidden without express authority. Offenders are liable to the payment of damages. 
All rights are reserved in the event of a patent grant or registration of a utility model or design. 
All specifications supplied herein are subject to change without notice at any time. 

Copyright © Queclink Wireless Solutions Co., Ltd. 2019 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

QSZTRACGV75MGUM0101 

Queclink 
Confidential

Summary of Contents for GV75MG

















Reviews: