GL100 User manual
4.4.4.
Set the parameters of Geo-Fence
Step_1:
User can define up to five Geo-Fence regions on GL100. Each region is a circular area
which is defined by central coordinate and radius. When the device enters or leaves a
predefined Geo-Fence region, GL100 will send alert information to server.
Step_1
Step_3
Step_4
Step_2
“
ID
”: The "
Send
" button will be enabled when some ID check boxes are selected. After
pressing the “
Send
” button, the rule of selected Geo-Fences will be downloaded to
GL100.
“
Latitude
”: 20bytes, unit: degree, example as 31.187891 degree
“
Longitude
”: 20bytes, unit: degree, example as 121.412248 degree
“
Radius
”: 10bytes, unit: meter, example as 1000 meters.
“
Check Interval
”: The interval of GPS checking for Geo-Fence alarm.
“
Type
”: A numeric which indicates when to report the notification to backend server
about the Geo-Fence.
In: Reports when enters the Geo-Fence region.
Out: Reports when exits from the Geo-Fence region.
In & out: Reports when enters or exits from the Geo-Fence region.
Step_2:
When “
ID
” check box is selected, the command message which shall be sent to GL100
will be generated based on input and displayed here. Please note this command message can also
TRACGL100UM002
- 17 -
Queclink
Confidential
