EN
.
32
Parameter No. 250 – Unsecure / Secure Inclusion
Values (size is 1 byte dec):
default value 0
0 – Unsecure Inclusion
1 – Secure Inclusion
The Weather Station Key supports both, the secure and unsecure inclusion. Even if the gateway
(hub) does not support security command classes, the Key could be included as unsecure and
keep all the functionality. By default, the Key includes as unsecure. To include the Key as
secure, follow the procedure:
1. Include the Key into the gateway (hub)
2. Set the parameter 250 to the value “1”
3. Enable add/remove mode on gateway (hub),
4. Hold service button S between 1.5 and 4 seconds to exclude the device
5. If the exclusion of the device was successful, the LED on the device starts blinking
6. Unplug the device out of the power supply
7. Enable add/remove mode on gateway (hub)
8. Plug the device into the power supply to star auto inclusion
9. Now the device should be included as secure
The same procedure is to include the device as unsecure.
