6.
Installation
6.1 Install I/O Cable
The I/O cable is a 16-pin cable including power, analog input, negative/positive input and output.
16
Power(+)
15
GND(-)
14
AD Input 2
13
Output 5
12
Output 4
11
Output 3
10
Output 2
9
Output 1
8
Power(+)
7
GND(-)
6
AD Input 2
5
Input 5
4
Input 4
3
Input 3
2
Input 2
1
Input 1
PIN Number
Color
Description
1(IN1/SOS)
White
Digital Input 1 (negative triggering)
2(IN2)
White
Digital Input 2 (negative triggering), for detecting status of vehicle door.
3(IN3)
White
Digital Input 3 (negative triggering), for detecting status of vehicle door or ACC.
4(IN4)
White
Digital Input 4 (positive triggering), for detecting status of vehicle door.
5(IN5)
White
Digital Input 5 (positive triggering), for detecting status of vehicle door or ACC.
6(AD1)
Blue
10 Bits Resolution Analog Inputs. 0-6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
7(GND)
Black
Ground
8(POWER)
Red
DC In(power source) Input Voltage: 9V-36V. 12V Suggested.
9(OUT1)
Yellow
Output1. It can be used to connect with relay for engine immobilization.
Low voltage (0V) when effective and open drain (OD) when ineffective.
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
10(OUT2)
11(OUT2)
12(OUT2)
13(OUT2)
14(AD2)
Blue
10 Bits Resolution Analog Inputs. 0~6V DC Detection. It can be used to connect
with temperature/fuel sensor etc.
15(GND)
Black
Ground. It can be used to connect with temperature/fuel sensor etc.
16(POWER)
Red
DC In (power source). Input voltage: 9V~36V. 12V suggested. Same as PIN8
Copyright © 2012 Qube Inc. All rights reserved.
Page
8
